Five33 Tiny Trainer 3" Carbon Frame W/ Hardware

The TinyTrainer 3″ Carbon Frame was originally developed for Evan “Headsup” Turner to practice flying big drones in his little backyard but became so much more. This replacement frame comes with the hardware listed below.

Note: Canopy not included. This is the carbon plate only, with hardware. 

VIDEO:  How to build a Five33 Tiny Trainer

• The frame supports 16 x 16 stacks and 25 mm toothpick AIO boards
• Supports both 9mm and 12mm mounting pattern motors.
• Developed for Evan “HeadsUp” Turner
• 2mm Carbon Frame

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Carbon Fiber Thickness: 2mm
• Size: 3″

IMPORTANT NOTES

• Insert important warnings or notes here. Example: “Do not overheat.” or “Always use the included charger for best performance.”

•  (Insert recommended products here. Example: “Battery: Lumenier 10000mAh 6s 25c Lipo Battery”)

• 3D Parts File

• 1x Five33 Tiny Trainer 3″ 2mm Carbon Frame
• 4x 16mm M2 Button Head Hex Drive Screws
• 8x 6mm M2 Button Head Hex Drive Screws
• 4x 16mm M2 Standoffs
• 8x 4″ Nylon Cable Ties
• 8x M2 Nylon Nuts

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS