GEPRC CineLog 20 2" HD Cinewhoop Drone W/ DJI O3 – 4S

The GEPRC Cinelog 20 2″ Cinewhoop can be shuttled in a narrow space and has been adapted to carry the O3 VTX. The resigned camera gimbal can easily eliminate high-frequency vibration and jello issues. The soft connection damping design of the camera gimbal can also be mounted with a naked GoPro base, which supports the installation of Naked GoPro 8/910/11, Insta360 Go2, and DJI Action2 cameras. The O3 AIR Unit version can shoot 4K 120fps video.

Note: (Insert any product options here in black text with options in bold.)

Example: “Choose from two KV’s: 1800KV (4S) or 2500KV (6S).”

Note: Action camera is not included.

VIDEO: The under 250 gram CINELOG 20 now has the DJI 03 Camera! AWESOME!

• Supports the installation of Naked GoPro 8/910/11, Insta360 Go2 and DJI Action2 cameras
• Camera gimbal can easily eliminate high-frequency vibration and jello issues
• Design the outer EVA damping ring to effectively reduce the impact force
• SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers
• Combining aesthetics and engineering for compact design
• Soft connection damping design of the camera gimbal
• Shoots shocking effects in a narrow space
• 2″ Pusher Design
• DJI O3 VTX

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

• Receiver: PNP(built-in DJI receiver), ELRS 2.4G, TBS Nano RX 
• CineLog20 HD O3 TBSNanoRX weight: 140g
• OSD: Betaflight OSD w/AT7456E chip
• Propeller: EMAX Avan Micro 2×2.4×4
• FC system: GEP-F411-35A AIO
• Model: CineLog20 HD O3
• Motor: GR1303.5 5500KV
• MCU: STM32F411CEU6
• Bottom plate: 1.5mm
• Gimbal plate: 2.0mm
• Camera: O3 Camera
• Antenna: 5.8G&2.4G
• Wheelbase: 100mm
• Gyro: ICM 42688-P
• Frame: GEP-CL20
• Top plate: 2.5mm
• VTX: O3 AIR Unit
• Flight time:4-6min
• ESC: 8Bit 35A

• 1x GEPRC CineLog 20 2″ HD Cinewhoop Drone w/ DJI O3 – 4S (Choose Receiver)
• 1x 4S Naked GP Camera power cable (with balanced terminal head)
• 1x TBS Antenna mount (Horizontal Type)
• 1x TBS Antenna mount (Vertical Type)
• 1x L-shaped screwdriver (1.5mm)
• 2x EVA damping rings of guards
• 1x TBS Antenna printed parts
• 2x M15*150mm battery strap
• 1x Naked GP Camera Base
• 2x Battery Silicone Pads
• 2x EVA Landing Pads
• 1x Antenna fixed tube
• 1x Hardware Set

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS