GEPRC CineLog 25 2.5" 4S HD CineWhoop Drone W/ RunCam Wasp

The GEPRC CineLog 25 2.5″ CineWhoop with RunCam Wasp has action camera stability, a 5.5-minute flight time, and long-range shooting capabilities perfect for cinematic flights. The most noteworthy feature of CineLog25 is the lightweight quadcopter that can carry a GoPro Lite. The CineLog 25 adopts the most popular backward push design on the FPV field at present, and can effectively use the thrust-weight ratio of the propeller to obtain higher flight efficiency. In the overall layout of the drone, we put VISTA HD in the center of the quadcopter, so that the center of gravity of the quadcopter is in the middle. The propeller Inlet is smoother and the noise is lower. GEPRC has redesigned the shock absorption structure of the camera mount and GoPro Lite, eliminating the jelly of the camera and FPV camera.

Note: (Insert any product options here in black text with options in bold.)

Example: “Choose from two KV’s: 1800KV (4S) or 2500KV (6S).”

Note: (Insert any product notes here in Red BOLD Italic. Example: “First Shipment expected January 2022” or “Electronics are Not Included”.)

VIDEO: (Insert Video Title here in bold.)

• Compatible with most action cameras
• New camera damping system
• Exclusive pusher-style frame
• Low center of gravity design
• Camera power line output 
• Optimized bottom design
• Low-noise optimization
• Adjustable lens angle
• EVA foam cushioning
• Long-range flight

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

• Antenna: GEPRC Momoda 5.8G Antenna Long Version LHCP UFL(85mm)
• CineLog25 HD Weight: 145.5g（Without battery）
• Motor: GR1404 4500kv(Upgraded Version)
• OSD: BetaFlight OSD w/ AT7456E chip
• Flight Controller: F411-35A AIO
• Camera: Runcam Link Wasp
• Props: GEMFAN D63-3
• Wheelbase: 109mm
• ESC: BLheli_S 20A
• MCU: STM32F411
• Frame: GEP-CL25
• VTX: Caddx Vista
• Brand: GEPRC
• Gyro: 6-Axis

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won’t need to set up another receiver. If you don’t have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

• Battery: 4S 450-750mAh or GEPRC 4S 660mAh 90/180C HV 3.8V/4.35V LiPo Battery

•   (Insert links such as manuals, firmware, etc)

• 1x GEPRC CineLog 25 2.5″ 4S HD CineWhoop Drone w/ RunCam Wasp (Choose Receiver)
• 1x 3D Printed TPU Seat for GOPRO Lite 
• 2x D63-3 Propellers (Set of 4)
• 2x EVA Foam Pad
• 2x Battery Pad
• 2x Battery Strap
• 1x Screwdriver

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS