The GEPRC CineLog 25 HD Pro is a lightweight quadcopter that can shoot video with a Naked GP action camera and adopts the most popular backward push design on the FPV field at present. This whoop can effectively use the thrust-weight ratio of the propeller to obtain higher flight efficiency. In the overall layout of the drone, GEPRC put a Link VTX in the center of the quadcopter, so that the center of gravity of the quadcopter is in the middle. The propeller inlet is smoother and the noise is lower. The redesigned shock absorption structure of the camera mount eliminated the jelly of the camera and FPV camera, with the use of 3, 4, and 5 damping rings (according to the flight state) to obtain the best stability in vibration and noise.
The flight time of CineLog25 is around 5.5 minutes (depending on flying habits). The stable electronic equipment and advanced frame materials make this quadcopter stable for FPV freestyle tricks. The customized EVA protective foam cushioning around the frame is more elastic and can effectively protect the fuselage during crashes! The F411-20A-F4 AIO and GEPRC GR1404 4500kv(Upgraded Version) motors use the in-flight system and power system. Compatible with 450mah ~ 750mah power batteries.
Features
- Perfectly Compatible with most the mainstream cameras
- Brand-new exclusive pusher frame
- New camera damping system
- Low center of gravity design
- With EVA foam cushioning
- Camera power line output
- Optimized bottom design
- Low noise optimization
- 5.5 Minutes Flight Time
- Adjustable lens angle
- Long-range flight
Specifications
- Motors: GR1404 4500kv (Upgraded Version)
- CineLog25 Weight: 125.6g (Without battery)
- OSD: BetaFlight OSD w/ AT7456E chip
- Antenna: GEPRC Momoda 5.8g RHCP
- Receiver: TBS Crossfire Nano RX
- Dimensions: 300×200×100mm
- Flight Controller: GEP-20A-F4
- Camera: RunCam Wasp
- Props: GEMFAN D63-3
- IMU: MPU6000(SPI)
- Wheelbase: 109mm
- ESC: BLheli_S 20A
- Frame: GEP-CL25
- MCU: STM32F411
- VTX: Link
- Brand: GEPRC
Recommended (Not Included)
- Battery: 4S 450-750mAh or GEPRC 4S 660mAh 90/180C HV 3.8V/4.35V LiPo Battery
Includes
- 1x GEPRC CineLog 25 2.5″ 4S HD Pro CineWhoop Drone w/ RunCam Wasp -TBS Crossfire
- 1x 3D Printed TPU Seat for GP
- 2x D63-3 Propellers (Set of 4)
- 2x EVA Foam Pad
- 2x Battery Strap
- 2x Battery Pad
- 1x Screwdriver
Featured Videos
ADD VIDEO TITLE HERE IN BOLD CAPS
ADD VIDEO TITLE HERE IN BOLD CAPS














Reviews
There are no reviews yet.