GEPRC CineLog 35 3.5" HD CineWhoop Drone W/ RunCam Link Wasp – 6S – TBS Crossfire

The CineLog35 has improved upon the basis of the CineLog30. Featuring an integrated protection guard design, the overall structure is firmer and more durable. Equipped with the latest FC with higher calculation speed and high efficiency… the 6S version uses GEP-F722-45A AIO. The 5 UART Ports bring enhanced performance. This quad is also equipped with the Link VTX and the RunCam Wasp camera, and the picture quality is extremely clear and clean. Upgraded power system, 2004 motor with D90-3 propellers provide stronger power output. Includes a 3D Print mount to install the GoPro 9 & GoPro 10. with a base that can carry Insta360 GO2 /  GEP Naked GoPro Hero 8 or Caddx Peanut camera mount.

Note: (Insert any product options here in black text with options in bold.)

Example: “Choose from two KV’s: 1800KV (4S) or 2500KV (6S).”

Note: Action Camera not included. This is the HD version with RunCam Wasp camera.

VIDEO: (Insert Video Title here in bold.)

• Camera mount base can carry Insta360 Go2 camera/Naked GoPro Hero 8/Caddx Peanut camera mounts
• Developed by GEPRC specifically for mounting complete GoPro HD cameras.
• Equipped with Link VTX and the RunCam Wasp camera.
• Upgraded 3.5-inch integrated protection guard
• Independent receiver cabin – binds quickly
• 3D Print mount for GoPro 9 & GoPro 10
• Durable high-strength structural design
• Low vibration and noise reduction
• 2004 motor with D90-3 propeller
• Improved damping rings

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Antenna: Momoda Long version UFL LHCP 175mm Antenna
• OSD: BetaFlight OSD w/AT7456E chip
• Motor: GR2004 1750KV (6S)
• FC: (6S) GEP-F722-45A AIO
• Model: CineLog35 HD Wasp
• Battery Connector: XT-60
• Camera: RunCam Wasp
• Receiver: TBS Crossfire
• IMU: MPU6000(SPI)
• Bottom plate: 2.0mm
• Wheelbase: 142mm
• MCU: STM32F722
• Frame: GEP-CL35
• Arm plate: 3.5mm
• Top plate: 2.5mm
• Propeller: D90-3
• Brand: GEPRC
• ESC: BLheli_S
• Weight: 234g
• VTX: Link

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won’t need to set up another receiver. If you don’t have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

• XT-60 Batteries: 850mAh-1100mAh (6S)

• 1x GEPRC CineLog 35 3.5″ HD CineWhoop Drone w/ RunCam Link Wasp – 6S – TBS Crossfire
• 2x LiPo Strap (M15x200mm)
• 4x 15-degree damping rings
• 2x Battery Silicone Pads
• 1x 3D Print GoPro Mount
• 1x Fixed Antenna tube
• 2x Landing Pads
• 1x Hardware Kit
• 1x Screwdriver

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS