GEPRC CineLog 35 V2 3.5" HD Cinewhoop Drone W/ DJI O3 – 6S

The CineLog 35 V2 features a DJI O3 VTX, main carbon plate, and injection protection frame with an increased 7075 aluminum column for structural strengthening. The battery mounting uses a tie with 7075 aluminum parts fixed, and the power XT60E1-M plug is integrated with the carbon plate for convenient application. The protective frame for O3 Air Unit adds a memory card and USB port for easy data reading. Equipped with F722-45A AIO and the new SPEEDX2 2105.5 motor, this drone has more power with an aggressive system and faster response. This is a 3.5-inch HD FPV cinematic FPV drone that integrates cinematic, freestyle, leisure, and safety to meet the user’s requirements for flying and filming various scenes indoors and outdoors. 

• Strengthened carbon plate, hollow design, injection protection frame, and noise reduction design
• Propeller Guard adds memory card and USB ports to O3 Air Unit for easy data reading
• O3 camera is designed with an independent under-hanging shock absorption gimbal
• GEP F722-45A AIO V2 high-performance flight controller
• SPEEDX2 2105.5 motors with HQ DT90 propellers
• Carefully tuned 3.5-inch HD cinematic FPV drone
• 7075 aluminum parts are fixed, solid and stable
• XT60E1-M Power Cable

• Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
• CineLog35 V2 HD O3 TBSNanoRX weight: 285.8g
• Motor: SPEEDX2 2105.5-2150KV（6S）
• OSD: Betaflight OSD w/AT7456E chip
• FC system: GEP-F722-45A AIO V2
• Propeller: HQProp D-T90MM
• Model: Cinelog35 V2 HD O3
• MCU: STM32F722RET6
• Flight time: 5′00″ -8′ 30″
• Frame: GEP-CL35 V2
• Wheelbase: 142mm
• Gimbal plate: 2.0mm
• Bottom plate: 1.5mm
• Antenna: 5.8G&2.4G
• Gyro: ICM 42688-P
• Top plate: 3.5mm
• VTX: O3 Air Unit
• ESC: 8Bit 45A
• Camera: O3
• GPS: None

• XT-60 Batteries: 1050mah-1300mah

• 1x GEPRC CineLog 35 V2 3.5″ HD Cinewhoop Drone w/ DJI O3 – 6S (Choose Receiver)
• 1x L-shaped screwdriver (1.5mm)
• 1x Naked GoPro Mounting Base
• 1x L-shaped screwdriver (2mm)
• 1x L-shaped screwdriver (3mm)
• 2x HQProp D-T90MM（2 pairs）
• 2x M20*250mm battery strap
• 1x Antenna fixed tube (pair)
• 1x Antenna Mounting Base
• 1x GoPro Mounting Base
• 2x Battery Silicone Pads
• 1x Plastic Tweezers
• 1x Hardware Set
• 1x M5 wrench
• 1x Keychain

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS