GEPRC Mark5 Pro DC BNF HD Drone W/ DJI O3 – 6S

The GEPRC Mark5 DC BNF has a newly upgraded 7075-T6 aluminum alloy camera side plate. This drone is fully adapted to carry DJI’s new O3 camera, with a field of view (FOV) of 155°, supporting up to 4K 60FPS. Specially designed TPU parts were designed for mounting the O3 VTX module, equipped with an air inlet cooling port, which is conducive to adequate heat dissipation. MARK5 O3 uses GEPRC’s latest SPAN F722-BT-HD V2 stack, with an ICM 42688P gyroscope, Bluetooth capabilities, SPAN BLHeli_32 50A ESC, GEPRC 2107.5 motors, and new Gemfan 5136 propellers. The DC structure has a wide and unobstructed viewing angle during flight, which is suitable for O3 internal video recording and direct output. MARK5 O3 is shipped with two different camera mounts, which can be mounted with a full range of GoPro action cameras, as well as Naked GoPro 8/10, Insta 360 GO2 and Caddx Peanut, etc. to record beautiful moments for your flight.

VIDEO: New GEPRC MARK 5 HD O3 is a Dream to Fly! Review

• Mounted a full range of GoPro cameras, as well as Naked GoPro 8, Insta 360 GO2, and Caddx Peanut cameras
• DC structure is suitable for O3 internal recording when no propeller is visible during flight
• Developed specifically for freestyle with deadcat squashed X-arm design
• Pro version frame includes 3D-printed skids
• Upgraded lens aluminum alloy side plate
• Independent capacitor and buzzer cabin
• Emerald Green propellers and 3D parts
• SPAN G50A BLHeli_32 4in1 50A ESC
• Shock absorption design
• GEPRC 2107.5 motors
• DJI’s new O3 VTX
• Built-in Bluetooth

• Motor: SPEEDX2 2107.5-1960KV (6S Version) / SPEEDX2 2107.5-2450KV（4S Version）
• Frame: GEP-MK5D O3 (Green) Standard – No Skids
• ESC: SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC
• Receiver: PNP, Frsky R-XSR, ELRS 2.4G
• Model: MARK5 DC HD O3 Quadcopter
• OSD: BetaFlight OSD w/AT7456E chip
• FC system: SPAN F722-BT-HD V2
• Antenna: DJI O3 antenna
• Propeller: Gemfan 5136
• Weight: MK5D: 426.0
• Bottom plate: 2.5mm
• VTX: DJI O3 Air Unit
• Wheelbase: 225mm
• Gyro: 42688-P(SPI)
• MCU: STM32F722
• Top plate: 2.5mm
• Arm plate: 5mm
• Camera: DJI O3
• Brand: GEPRC

• XT-60 Batteries: 1050mAh-1550mAh 6S

• 1x GEPRC Mark5 Pro DC BNF HD Drone w/ DJI O3 – 6S (Choose Receiver)
• 1x 3D printed parts (including pro skids)
• 4x Gemfan 5136 propellers (pair)
• 1x Battery strap M15x250mm
• 2x Battery strap M20x220mm
• 1x Action cam mount holder
• 2x Battery Silicone Pads
• 1x Set of screwdrivers
• 1x Antenna fixed tube
• 1x Set of screws

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS